SCR-296-A - A short-range Gun-Laying Radar Set - A gun-laying Radar set built by the Western Electric Company to detect seagoing surface craft. Use by the Coast Artillery to provide target range and azimuth data to World War II gun batteries with 6" and larger guns.
SCR-296 Gun-Laying Radar
Development of the SCR-296 began in 1941 when the Signal Corps Lab obtained a set from Western Electric Company and enhanced the target tracking ability with a lobe-switching modification. The modified set was designated the SCR-296-A. The Coast Artillery tested it and ordered 20 sets before the attack on Pearl Harbor. After the attack, concern for the safety of harbors and anchorages increased and the Coast Artillery looked to the SCR-296-A radar to provide a gun laying radar set for existing 6" and larger gun batteries then protecting all the major U.S. harbors. These harbor defenses were largely outdated and relied upon a complex network of optical spotting stations to provide target data. Advances in ship armament had produced weapons that were capable of offshore bombardment beyond the range of the existing batteries and spotting stations, especially during marginal weather. The SCR-296-A would provide an all-weather target tracking capability at the maximum range of the shore batteries.
The first SCR-296-A was delivered in April 1942, the second in July 1942. The Coast Artillery then had 176 sets on order for delivery before the middle of 1943. This capability coincided with the construction of the new 200 series 6" gun batteries at every significant harbor defense and 100 series 16" gun batteries at selected harbors.
SCR-296-A Gun-Laying Radar
Element
Value
Notes
Nomenclature
SCR-296-A
Origins
SCR-296
Manufacturer
Western Electric Company
Type
Gun-Laying
Number Made
176
IEEE Band
UHF
Frequency
700 MHz
PRF
Pulse Width
Rotation Speed
Manual
Power
Range
20,000 yards
short range
Altitude
< 10,000
Introduced
1942
SCR-296-A Radar Equipment Room.
Site Operation
SCR-296-A Range Operator Display.SCR-296-A Azimuth Operator Displays
In operation, the SCR-296-A radar could only track one target at a time. Target assignments were made from the harbor HECP/HDCP command posts by telephone, citing the approximate range and azimuth of the target. The SCR-296-A radar operators would then find the target and pass the precise range and azimuth to the plotting room at the gun battery by phone. Two operators were required, one for the range position and one for the azimuth position.
The radar operators would continue to track the target and update the plotting room as the range and azimuth changed.
SCR-582 to SCR-697A Radar, Seacoast Battery Communications Paths.
In operation, the range accuracy was about ± 30 yards while azimuth accuracy was about ± 0.20 degree under the best conditions. The set had a dependable range of 20,000 yards on a destroyer size target when properly sited between 150 to 500 feet above sea level.
The operating crew consisted of 5 men plus a power plant operator and radar maintenance man.
When crated, the total weight was 91,763 lbs. The largest unit weighed 5,270 lbs. The SCR-296-A included a tower, a radar operations building, and two power plant buildings. The tower came in heights of 25, 50, 75, and 100 feet and included the wooden antenna housing constructed to look like a water tower. The concrete foundations were engineered by the Corps of Engineers who also erected the structures. The equipment and the equipment installation were usually provided by the Signal Corps. Primary power of 2.3 KW could be supplied by one of two PE-84C generator sets, post power or commercial power.
U.S. Radar, Operational Characteristics of Radar Classified by Tactical Application, FTP 217, Prepared by Authority of the Joint Chiefs of Staff, by the Radar Research and Development Sub-Committee of the Joint Committee on New Weapons and Equipment, 1 Aug 1943, Washington, D.C.
